Siser Colorprint PU Matt


New polyurethane material very thin and light . Specifically formulated for ink jet solvent and eco solvent based inks – printing and cutting systems. Suitable for cotton, polyester, poly-cotton blends, Lycra ®.



PU heat seal material with polyester backing and matt finish, created for inkjet digital printing & cutting systems with solvent or eco solvent based inks.
Average film thickness before application:
80 micron

Basic information

Due to the many different base materials available on the market, the following instructions are given as a guideline only :
Plotter settings (eg. with ROLAND VP-300)
new at 50°

Minimum required pressure: 65 gf Transfer setup

Temperature: 155°C (310°F) Time: 15”
Pressure: medium (3÷4 bar)

Application instructions

Print and cut the material
Weed the exceeding material
Remove the print from the polyester backing using Siser’s T.T.D. Easy (adhesive, transparent and resistant to high temperatures)
Heat apply
Remove the application tape warm (should you use other application tapes, follow the manufacturer’s instructions) 

Suitable textiles 

Cotton, polyester and blends of these materials (not suited for treated and dye sublimation fabrics)

Washing instructions 

Wait 24h after the heat transfer
60°C Max- inside out
Do not use bleach or other aggressive chemical agents. Dry clean:
Tumble dry: yes 


Other Products

Siser Soft Print
Siser Soft Print Color...
Siser Soft Print Color...
Siser Colorprint PU Matt

Popular Products

Roland XF-640
Roland XF-640
Roland VersaUV LEF-20
Roland VersaUV LEF-20
Roland CAMM-1 GS-24
Roland CAMM-1 GS-24